错误代码： 10.23.70 | 惠普5系激光打印机 故障代码 其他系列也可以参考 | 二〇二一年五月二十七日
2021-06-01
错误代码： 10.23.70 |
惠普5系激光打印机 故障代码 其他系列也可以参考 | 二〇二一年五月二十七日
--------------------------------------------------
技术热线：朱师傅整理
--------------------------------------------------
中文译本：
10.23.70更换定影组件
描述
打印机会指示定影器组件何时达到其估计的使用寿命。剩余的实际寿命可能是
与估计不同。当打印质量不再下降时，有一个可安装的更换定影组件
可以接受的。
除非不再可以接受打印质量，否则现在无需更换定影器组件。
注：定影器组件达到其使用寿命将要结束时，请在该保修期内获得HP高级保护保修。
定影组件两端。
建议操作
更换定影组件。
警告！处理定影器时请小心。打印机运行时，定影器可能很热。
1.打开右门。
2.握住定影器两侧的蓝色手柄，然后将其笔直拉出以将其取出。
3.安装备用定影器。
4.关闭右门。
描述
打印机会指示定影器组件何时达到其估计的使用寿命。剩余的实际寿命可能是
与估计不同。当打印质量不再下降时，有一个可安装的更换定影组件
可以接受的。
除非不再可以接受打印质量，否则现在无需更换定影器组件。
注：定影器组件达到其使用寿命将要结束时，请在该保修期内获得HP高级保护保修。
定影组件两端。
建议操作
更换定影组件。
警告！处理定影器时请小心。打印机运行时，定影器可能很热。
1.打开右门。
2.握住定影器两侧的蓝色手柄，然后将其笔直拉出以将其取出。
3.安装备用定影器。
4.关闭右门。
--------------------------------------------------
英文解释：
10.23.70 Replace Fuser
Kit
Description
The printer indicates when the fuser kit is at its estimated end of life. The actual life remaining might be
different than the estimation. Have a replacement fuser kit available to install when print quality is no longer
acceptable.
The fuser kit does not need to be replaced now unless the print quality is no longer acceptable.
NOTE: After the fuser kit reaches its approximated end of life, the HP Premium Protection Warranty on that
fuser kit ends.
Recommended action
Replace the fuser kit.
WARNING! Use caution when handling the fuser. The fuser might be hot when the printer is operating.
1. Open the right door.
2. Grasp the blue handles on both sides of the fuser and pull straight out to remove it.
3. Install the replacement fuser.
4. Close the right door.
Description
The printer indicates when the fuser kit is at its estimated end of life. The actual life remaining might be
different than the estimation. Have a replacement fuser kit available to install when print quality is no longer
acceptable.
The fuser kit does not need to be replaced now unless the print quality is no longer acceptable.
NOTE: After the fuser kit reaches its approximated end of life, the HP Premium Protection Warranty on that
fuser kit ends.
Recommended action
Replace the fuser kit.
WARNING! Use caution when handling the fuser. The fuser might be hot when the printer is operating.
1. Open the right door.
2. Grasp the blue handles on both sides of the fuser and pull straight out to remove it.
3. Install the replacement fuser.
4. Close the right door.
--------------------------------------------------
实际故障案例
3】故障案例：
--------------------------------------------------
2】故障案例：
--------------------------------------------------
1】故障案例：
扫描开通重新登录查看更多
添加朱师傅微信咨询
