错误代码： 47.WX.YZ | ● 47.FC.00 |● 47.FC.01 | ● 47.FC.02 | ● 47.FC.03 | ● 47.FC.10 | ● 47.FC.11 | ● 47.FC.12 | ● 47.FC.13 | ● 47.FC.20 | ● 47.FC.21 | ● 47.FC.22 | ● 47.FC.23 | ● 47.FC.30 | ● 47.FC.31 | ● 47.FC.32 | ● 47.FC.33 | ● 47.FC.40 | ● 47.FC.41| ● 47.FC.42 | ● 47.FC.43 | | ● 47.FC.00 | | 惠普
2021-06-01
--------------------------------------------------
技术热线：朱师傅整理
--------------------------------------------------
中文译本：
47.WX.YZ打印机校准失败要继续，请触摸“确定”
描述
设备无法访问或实现图像模式文件之一。
Y =校准类型，Z =事件
●47.FC.00（事件代码）彩色平面配准（CPR）在系统初始化时找不到图像
●47.FC.01（事件代码）CPR存储映像失败
●47.FC.02（事件代码）CPR找不到图像
●47.FC.03（事件代码）CPR打印引擎执行失败
●47.FC.10（事件代码）在系统初始化时找不到连续的Dmax Dhalf映像
●47.FC.11（事件代码）连续Dmax Dhalf存储映像失败
254第2章解决问题ZHCN
从www.Manualslib.com手册搜索引擎下载●47.FC.12（事件代码）连续Dmax Dhalf找不到图像
●47.FC.13（事件代码）连续Dmax Dhalf打印引擎执行失败
●47.FC.20（事件代码）错误扩散在系统初始化时找不到图像
●47.FC.21（事件代码）错误扩散存储映像故障
●47.FC.22（事件代码）错误扩散图像未找到
●47.FC.23错误扩散打印引擎执行失败
●47.FC.30 0（事件代码）感光鼓速度调节在系统初始化时找不到图像
●47.FC.31（事件代码）感光鼓速度调整存储图像故障
●47.FC.32（事件代码）感光鼓速度调节图像未找到
●47.FC.33（事件代码）感光鼓速度调整打印引擎执行失败
●47.FC.40（事件代码）脉冲宽度调制在系统初始化时找不到图像
●47.FC.41（事件代码）脉冲宽度调制存储图像故障
●47.FC.42（事件代码）脉冲宽度调制找不到图像
●47.FC.43（事件代码）脉冲宽度调制打印引擎执行失败
建议操作
1.关闭打印机，然后再次打开。
2.如果该错误在一个设备上频繁且持续多个电源循环持续存在，请执行
下列的。
●在“管理/故障排除/诊断”中，运行硬盘测试以验证主机的运行状况。
设备。修复大容量存储设备发现的任何问题
3.如果错误仍然存在，请重新加载固件。
4.如果错误仍然存在，请使用“预引导”菜单中的“部分清除”项目清除活动分区，然后
重新加载固件。
描述
设备无法访问或实现图像模式文件之一。
Y =校准类型，Z =事件
●47.FC.00（事件代码）彩色平面配准（CPR）在系统初始化时找不到图像
●47.FC.01（事件代码）CPR存储映像失败
●47.FC.02（事件代码）CPR找不到图像
●47.FC.03（事件代码）CPR打印引擎执行失败
●47.FC.10（事件代码）在系统初始化时找不到连续的Dmax Dhalf映像
●47.FC.11（事件代码）连续Dmax Dhalf存储映像失败
254第2章解决问题ZHCN
从www.Manualslib.com手册搜索引擎下载●47.FC.12（事件代码）连续Dmax Dhalf找不到图像
●47.FC.13（事件代码）连续Dmax Dhalf打印引擎执行失败
●47.FC.20（事件代码）错误扩散在系统初始化时找不到图像
●47.FC.21（事件代码）错误扩散存储映像故障
●47.FC.22（事件代码）错误扩散图像未找到
●47.FC.23错误扩散打印引擎执行失败
●47.FC.30 0（事件代码）感光鼓速度调节在系统初始化时找不到图像
●47.FC.31（事件代码）感光鼓速度调整存储图像故障
●47.FC.32（事件代码）感光鼓速度调节图像未找到
●47.FC.33（事件代码）感光鼓速度调整打印引擎执行失败
●47.FC.40（事件代码）脉冲宽度调制在系统初始化时找不到图像
●47.FC.41（事件代码）脉冲宽度调制存储图像故障
●47.FC.42（事件代码）脉冲宽度调制找不到图像
●47.FC.43（事件代码）脉冲宽度调制打印引擎执行失败
建议操作
1.关闭打印机，然后再次打开。
2.如果该错误在一个设备上频繁且持续多个电源循环持续存在，请执行
下列的。
●在“管理/故障排除/诊断”中，运行硬盘测试以验证主机的运行状况。
设备。修复大容量存储设备发现的任何问题
3.如果错误仍然存在，请重新加载固件。
4.如果错误仍然存在，请使用“预引导”菜单中的“部分清除”项目清除活动分区，然后
重新加载固件。
--------------------------------------------------
英文解释：
47.WX.YZ Printer Calibration Failed To continue,
touch “OK”
Description
The device is unable to access or implement one of the image patterns files.
Y = Calibration type, Z = Event
● 47.FC.00 (event code) Color plane registration (CPR) Image not found at system initialization
● 47.FC.01 (event code) CPR Store Image failure
● 47.FC.02 (event code) CPR Image not found
● 47.FC.03 (event code) CPR Print engine execution failure
● 47.FC.10 (event code) Consecutive Dmax Dhalf Image not found at system initialization
● 47.FC.11 (event code) Consecutive Dmax Dhalf Store image failure
254 Chapter 2 Solve problems ENWW
Downloaded from www.Manualslib.com manuals search engine
● 47.FC.12 (event code) Consecutive Dmax Dhalf Image not found
● 47.FC.13 (event code) Consecutive Dmax Dhalf Print engine execution failure
● 47.FC.20 (event code) Error Diffusion Image not found at system initialization
● 47.FC.21 (event code) Error Diffusion Store image failure
● 47.FC.22 (event code) Error Diffusion Image not found
● 47.FC.23 Error Diffusion Print engine execution failure
● 47.FC.30 0 (event code) Drum Speed Adjustment Image not found at system initialization
● 47.FC.31 (event code) Drum Speed Adjustment Store image failure
● 47.FC.32 (event code) Drum Speed Adjustment Image not found
● 47.FC.33 (event code) Drum Speed Adjustment Print engine execution failure
● 47.FC.40 (event code) Pulse Width Modulation Image not found at system initialization
● 47.FC.41 (event code) Pulse Width Modulation Store image failure
● 47.FC.42 (event code) Pulse Width Modulation Image not found
● 47.FC.43 (event code) Pulse Width Modulation Print engine execution failure
Recommended action
1. Turn the printer off, and then on again.
2. If the error persists over multiple power cycles frequently and consistently on a unit then do the
following.
● In the Administration/Troubleshooting/Diagnostics, run the hard disk tests to validate health of the
device. Fix any issue found with the mass storage device
3. If the error persists, reload the firmware.
4. If the error persists, clear the active partition by using the Partial Clean item in the Preboot menu then
reload the firmware.
Description
The device is unable to access or implement one of the image patterns files.
Y = Calibration type, Z = Event
● 47.FC.00 (event code) Color plane registration (CPR) Image not found at system initialization
● 47.FC.01 (event code) CPR Store Image failure
● 47.FC.02 (event code) CPR Image not found
● 47.FC.03 (event code) CPR Print engine execution failure
● 47.FC.10 (event code) Consecutive Dmax Dhalf Image not found at system initialization
● 47.FC.11 (event code) Consecutive Dmax Dhalf Store image failure
254 Chapter 2 Solve problems ENWW
Downloaded from www.Manualslib.com manuals search engine
● 47.FC.12 (event code) Consecutive Dmax Dhalf Image not found
● 47.FC.13 (event code) Consecutive Dmax Dhalf Print engine execution failure
● 47.FC.20 (event code) Error Diffusion Image not found at system initialization
● 47.FC.21 (event code) Error Diffusion Store image failure
● 47.FC.22 (event code) Error Diffusion Image not found
● 47.FC.23 Error Diffusion Print engine execution failure
● 47.FC.30 0 (event code) Drum Speed Adjustment Image not found at system initialization
● 47.FC.31 (event code) Drum Speed Adjustment Store image failure
● 47.FC.32 (event code) Drum Speed Adjustment Image not found
● 47.FC.33 (event code) Drum Speed Adjustment Print engine execution failure
● 47.FC.40 (event code) Pulse Width Modulation Image not found at system initialization
● 47.FC.41 (event code) Pulse Width Modulation Store image failure
● 47.FC.42 (event code) Pulse Width Modulation Image not found
● 47.FC.43 (event code) Pulse Width Modulation Print engine execution failure
Recommended action
1. Turn the printer off, and then on again.
2. If the error persists over multiple power cycles frequently and consistently on a unit then do the
following.
● In the Administration/Troubleshooting/Diagnostics, run the hard disk tests to validate health of the
device. Fix any issue found with the mass storage device
3. If the error persists, reload the firmware.
4. If the error persists, clear the active partition by using the Partial Clean item in the Preboot menu then
reload the firmware.
--------------------------------------------------
实际故障案例
3】故障案例：
--------------------------------------------------
2】故障案例：
--------------------------------------------------
1】故障案例：
扫描开通重新登录查看更多
添加朱师傅微信咨询
