--------------------------------------------------

中文译本：

50.WX.YZ错误消息
50.1倍
描述
定影温度低故障
256第2章解决问题ZHCN
从www.Manualslib.com手册搜索引擎下载推荐的操作
1.卸下并重新安装定影器。确保正确放置。
2.确保定影器中没有剩余纸张。
3.检查定影器和打印机之间的连接器（J1901）。如果损坏，请更换定影驱动器
组件或定影器。
4.重新连接定影控制PCA上的连接器（J303和J305）和DC上的连接器（J107）
控制器PCA
5.如果问题仍然存在，请更换定影器。
6.如果仍然存在错误，请更换定影电源组件部件号：RM2-7125-000CN。
50.1X.YZ
描述
定影温度低故障
建议操作
1.卸下并重新安装定影器。确保正确放置。
2.确保定影器中没有剩余纸张。
3.检查定影器和打印机之间的连接器（J50）。如果损坏，请更换定影驱动器
组件或定影器。
4.重新连接定影控制PCA上的连接器（J2603）和直流控制器PCA上的连接器（J116）
5.如果问题仍然存在，请更换定影器。
6.如果仍然存在错误，请更换定影电源组件部件号：RM2-7125-000CN。

50.WX.YZ Error Messages
50.1X
Description
Low fuser temperature failure
256 Chapter 2 Solve problems ENWW
Downloaded from www.Manualslib.com manuals search engine
Recommended action
1. Remove and reinstall the fuser. Make sure that it is seated correctly.
2. Make sure that there is no residual paper in the fuser.
3. Check the connector (J1901) between the fuser and the printer. If it is damaged, replace the fuser drive
assembly or fuser.
4. Reconnect the connectors (J303 and J305) on the fuser control PCA and connector (J107) on the DC
controller PCA
5. If the issue persists, replace the fuser.
6. If error still remains, replace the Fuser Power Supply assembly Part number: RM2-7125-000CN.
50.1X.YZ
Description
Low fuser temperature failure
Recommended action
1. Remove and reinstall the fuser. Make sure that it is seated correctly.
2. Make sure that there is no residual paper in the fuser.
3. Check the connector (J50) between the fuser and the printer. If it is damaged, replace the fuser drive
assembly or fuser.
4. Reconnect the connector (J2603) on the fuser control PCA and connector (J116) on the DC controller PCA
5. If the issue persists, replace the fuser.
6. If error still remains, replace the Fuser Power Supply assembly Part number: RM2-7125-000CN.